Tips From the Moving Company Pros: The Best Ways To Move a Pinball Maker



With pinball making a substantial resurgence throughout the nation, Gentle Giant desires to make certain that these traditional, lovely machines stay damage-free while being carried. Oh, and we want the individuals moving them to be safe, too.

Initially glance, pinball devices can appear frightening to move because of their fragility, size, and weight. Thankfully, our competent Giants have a couple of tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

The bulk of modern pinballs (made in the last 20 years or two) have a hinge system which permits the headbox to be folded down. Early pinball machines had their headboxes bolted on, utilizing either 2 or four bolts. All Electro-Mechanical pinballs use this system, in addition to the early Solid State devices.

Later on makers have hinges and use a latching system to keep the headbox upright. There might also be two bolts inside as included security, in case the latch is broken or unintentionally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you require to remove the headbox rear gain access to panel to get to the bolts and plugs inside. Typically this panel has a lock on it to keep it in location, however over time the key might have been lost. On a regular basis, there is a screw keeping this panel in place.

As soon as within, remove the bolts and unplug the big adapters that have wiring going down into the maker. You might wish to label these ports to put them back in the ideal spot, but they must be various sizes, making it difficult to plug back incorrectly.

You can now eliminate the headbox entirely, or fold the headbox down onto the playfield glass. Make certain you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Solid State Pinballs

For early Solid State Pinballs, you will need to get rid of the back glass. There is a lock situated on the headbox in one of three places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.

As soon as opened, remove the back glass by lifting it up using the lift channel (at the bottom of the glass), then pull it out from the bottom.

Then, open the back box lamp panel by lifting the latch situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and offer you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to lift up the lamp panel in order to swing it open.

Now that you are inside, you can eliminate the bolts, and any plugs that have wires decreasing into the maker. You may wish to label these plugs to put them back in the best area. You might not have to remove the plugs, as the wiring must be long enough to permit the headbox to be folded down.

At this moment, you can secure the lamp panel and replace the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the provided key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the device. This is an easy setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep great post to read the back glass in location.

You need to get inside if you can not fold the head box down. There is a lock located at the top of the back glass in the center. Utilize the provided secret to unlock, and get rid of the back glass by lifting it up from the bottom, and then pulling it out from the bottom.

Next, you will require to get rid a fantastic read of the display screen panel. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Eliminate the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you utilize some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Getting rid of the Legs.

Pinball Machine legs are held in place by eight bolts. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into.

But these captive nuts and threaded plates can be damaged, and using extra nuts may have been required. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and get rid of the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.

You need to now have access to any nuts that might have been utilized. As soon as any nuts have actually been gotten rid of, change the playfield glass and lock down bar, and lock the front door.

Make certain to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to match.
Filling the Pinball.

You are now all set to carry your pinball maker. Prior to you fill it, make certain you get rid of the pinballs so they do not bounce around throughout transportation.

If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs simply prior to packing the device. Grab a friend to help and have one of you supporting the pinball, while the other gets rid of the front legs. Move the maker in, then get rid of the back legs. It is much simpler to pack the device front.

Ensure you strap the pinball in, as you do not want it moving if you have to stop suddenly!

For Electro-Mechanical pinball machines, you need to remove the headbox rear gain access to panel to get access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it may be easier to get rid of the legs simply prior to filling the device. Grab a buddy to help and have one my review here of you supporting the pinball, while the other removes the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *